10-Inch L-Shaped Steel Countertop Support Bracket — Black

Support a countertop overhang with a sturdy black steel bracket that wraps over the cabinet edge. Its L-shaped profile provides a 10-inch horizontal support arm and a 4-inch vertical mounting leg, with countersunk holes for a clean installation.

Dimensions and finish

• Model: CTOPSUP10-L.
• Horizontal arm: 10 inches (254 mm).
• Width: 2 inches (50.8 mm).
• Vertical leg: 4 inches (101.6 mm).
• Steel thickness: 7 mm, as shown on the factory dimension drawing.
• Black finish with rounded outer end and countersunk mounting holes.

Installation and tested load

The factory report tests a pair of brackets at 150 lb, installed 16 inches on center. This is the tested two-bracket configuration, not the capacity of one bracket. Confirm the countertop material, overhang, cabinet construction, fastening and bracket spacing for your installation.

What you receive

One bracket — $34.70 each. Quantity one is one bracket. Cabinetry and countertop are sold separately. Review the drawing and report before installation.

Product documents

Dimension Drawing (PDF)
Load Test Report (PDF)
Factory Warranty (PDF)