12V IP67 Waterproof LED Power Supply — 60W or 150W

from $52.83

Power 12V cabinet and accent lighting in indoor or outdoor settings with a hardwired, IP67-rated LED supply. Choose 60W or 150W to suit your lighting system.

Available wattages

  • 60W — T-60W-12-WP-HW: supplier list $53.83; MDI $52.83 each.

  • 150W — T-150W-12-WP-HW: supplier list $147.98; MDI $145.26 each.

Specifications & compatibility

  • 12V DC output; sold individually.

  • IP67-rated power supply for dry, damp and wet locations, indoors or outdoors. Wiring connections must be protected and sealed as appropriate for the installation.

  • Use compatible low-voltage controls on the 12V output side only. Not for dimming on the AC input side.

  • Compatible with Task Lighting low-voltage dimming systems, sensors and switches, including WAV, Uno, Duo, Quattro and touch dimmer controls.

  • 60W housing: 6-3/8 in. L × 1-5/8 in. W × 1-1/4 in. H. Select the correct wattage and allow room for wiring and service access.

  • Surface mounting. Mounting screws and wire nuts are not included.

  • The factory identifies 12V power supplies over 60W as commercial-use products, not UL Class 2 listed for residential use.

  • Install in an accessible location, not an attic. Hardwired installation requires a qualified electrician.

  • Three-year limited manufacturer warranty.

Lighting, dimmers, controls and installation hardware are sold separately. Match the supply to the total connected load and the requirements of your lighting system.

Product documents

Specifications · Warranty

Wattage:

Power 12V cabinet and accent lighting in indoor or outdoor settings with a hardwired, IP67-rated LED supply. Choose 60W or 150W to suit your lighting system.

Available wattages

  • 60W — T-60W-12-WP-HW: supplier list $53.83; MDI $52.83 each.

  • 150W — T-150W-12-WP-HW: supplier list $147.98; MDI $145.26 each.

Specifications & compatibility

  • 12V DC output; sold individually.

  • IP67-rated power supply for dry, damp and wet locations, indoors or outdoors. Wiring connections must be protected and sealed as appropriate for the installation.

  • Use compatible low-voltage controls on the 12V output side only. Not for dimming on the AC input side.

  • Compatible with Task Lighting low-voltage dimming systems, sensors and switches, including WAV, Uno, Duo, Quattro and touch dimmer controls.

  • 60W housing: 6-3/8 in. L × 1-5/8 in. W × 1-1/4 in. H. Select the correct wattage and allow room for wiring and service access.

  • Surface mounting. Mounting screws and wire nuts are not included.

  • The factory identifies 12V power supplies over 60W as commercial-use products, not UL Class 2 listed for residential use.

  • Install in an accessible location, not an attic. Hardwired installation requires a qualified electrician.

  • Three-year limited manufacturer warranty.

Lighting, dimmers, controls and installation hardware are sold separately. Match the supply to the total connected load and the requirements of your lighting system.

Product documents

Specifications · Warranty