Coordinate an appliance column with the Signature Shaker 33-inch-wide single oven cabinet, 27-inch depth. Two upper doors sit above an appliance opening, with three full-width drawers below. Ships ready to assemble (RTA).
OD338427: 33 inches wide × 84 inches high × 27 inches deep.
OD339027: 33 inches wide × 90 inches high × 27 inches deep.
OD339627: 33 inches wide × 96 inches high × 27 inches deep.
Two upper doors sit above an appliance opening, with three full-width drawers below.
Full-overlay Shaker fronts and a recessed toe kick.
½-inch plywood cabinet box.
Solid wood door framing with recessed center panels.
Soft-close, six-way adjustable door hinges.
Dovetail drawer boxes with full-extension, soft-close undermount drawer glides.
Cabinet exterior sides are finished to coordinate with the selected door color. Small natural wood edges may be visible at the top or bottom.
The cabinet interior has natural wood veneer with a UV-cured finish. Natural grain and shade can vary.
OD338427: White.
OD339027: White.
OD339627: White.
The RTA package includes cabinet components, doors and door hardware, three drawer boxes, drawer fronts and drawer glides. Assembly and installation are required. Decorative handles, fillers, molding, finishing panels and installation fasteners are sold separately.
The appliance opening is shown for configuration only. An oven is not included. Overall cabinet dimensions are not appliance cutout or usable opening dimensions. Before ordering, match the selected oven’s installation instructions to the cabinet, including required opening, ventilation, electrical access, clearances and load support. Confirm any required trim or support work with the installer.
Check ceiling height, the delivery route and clearance needed to raise the cabinet into place. Allow space at walls and adjoining cabinets for doors and drawers to open. Install level and square, securely anchored to suitable wall framing using hardware selected for the wall and load. Finished cabinet dimensions are separate from shipping estimates.
Browse the Signature Shaker collection and review our cabinet buying guide. For size or layout help, use the floating Connect with us widget for the quickest way to reach MDI.
The uncolored cabinet illustration shows the configuration. Proportions vary by model; use the selected model and dimension drawing for actual size. Only the finish choices listed for each model above are available. Complete-door samples illustrate the available finishes. Lighting and screen settings affect finish appearance.
Coordinate an appliance column with the Signature Shaker 33-inch-wide single oven cabinet, 27-inch depth. Two upper doors sit above an appliance opening, with three full-width drawers below. Ships ready to assemble (RTA).
OD338427: 33 inches wide × 84 inches high × 27 inches deep.
OD339027: 33 inches wide × 90 inches high × 27 inches deep.
OD339627: 33 inches wide × 96 inches high × 27 inches deep.
Two upper doors sit above an appliance opening, with three full-width drawers below.
Full-overlay Shaker fronts and a recessed toe kick.
½-inch plywood cabinet box.
Solid wood door framing with recessed center panels.
Soft-close, six-way adjustable door hinges.
Dovetail drawer boxes with full-extension, soft-close undermount drawer glides.
Cabinet exterior sides are finished to coordinate with the selected door color. Small natural wood edges may be visible at the top or bottom.
The cabinet interior has natural wood veneer with a UV-cured finish. Natural grain and shade can vary.
OD338427: White.
OD339027: White.
OD339627: White.
The RTA package includes cabinet components, doors and door hardware, three drawer boxes, drawer fronts and drawer glides. Assembly and installation are required. Decorative handles, fillers, molding, finishing panels and installation fasteners are sold separately.
The appliance opening is shown for configuration only. An oven is not included. Overall cabinet dimensions are not appliance cutout or usable opening dimensions. Before ordering, match the selected oven’s installation instructions to the cabinet, including required opening, ventilation, electrical access, clearances and load support. Confirm any required trim or support work with the installer.
Check ceiling height, the delivery route and clearance needed to raise the cabinet into place. Allow space at walls and adjoining cabinets for doors and drawers to open. Install level and square, securely anchored to suitable wall framing using hardware selected for the wall and load. Finished cabinet dimensions are separate from shipping estimates.
Browse the Signature Shaker collection and review our cabinet buying guide. For size or layout help, use the floating Connect with us widget for the quickest way to reach MDI.
The uncolored cabinet illustration shows the configuration. Proportions vary by model; use the selected model and dimension drawing for actual size. Only the finish choices listed for each model above are available. Complete-door samples illustrate the available finishes. Lighting and screen settings affect finish appearance.
