Escada Diagonal Corner Sink Base Cabinet

Use an Escada diagonal corner sink base to position a sink at the junction of two cabinet runs while keeping the full-overlay door style consistent throughout the kitchen. Ships ready to assemble (RTA).

Sizes and configuration

• NCSB36: 36 inches wide × 34½ inches high × 24 inches deep.
• NCSB42: 42 inches wide × 34½ inches high × 24 inches deep.
• One-door diagonal sink base. Sink, faucet, and countertop are sold separately.

Cabinet construction

• ½-inch plywood cabinet box with a solid wood face frame.
• Full-overlay, five-piece Escada doors with solid wood stiles and rails and a plywood center panel.
• Soft-close, six-way adjustable hinges.
• Natural wood veneer interior with a UV-cured finish; interior wood shade may vary.

Finish and installation planning

Available in White, Dove, Midnight Blue, Honey Maple, Vintage Wood. Honey Maple uses natural birch with a stained finish; natural grain and color variation are expected.

Honey Maple includes the matching box, hardware, face frame, and front components for assembly. The box has a natural exterior; add a matching skin or decorative end panel to finish any exposed cabinet side.

Confirm the sink manufacturer's required base size, bowl depth, plumbing clearances, and countertop cutout before ordering. Allow clearance for the door to open without hitting adjacent hardware.

Complete your Escada layout

Coordinate this cabinet with waste basket cabinets, cabinet fillers, matching finish skins.