6-Foot Stainless-Finish Soft-Close Barn Door Hardware Kit

$332.42

Give a pantry, laundry room, closet or study a clean sliding-door entrance with exposed stainless-finish hardware and soft-close movement. This complete hardware set pairs a 72-inch rail with top-mounted rollers for a single wood door.

Fit and specifications

  • Model: BDH-05SS-72-R. One complete hardware set; door is sold separately.

  • 6-foot (72-inch) rail for doors up to 36 inches wide.

  • Stainless-steel finish over steel hardware; soft-close mechanism installed in the rail.

  • Maximum door weight: 175 lb, as specified in the factory installation instructions.

  • Mount the rail to solid wood studs, structural blocking or a properly secured header board. Do not mount the complete rail to drywall alone.

  • Two floor-guide arrangements are included. The internal guide requires a centered groove 1/2 inch wide × 1/2 inch deep in the bottom of the door; see the instructions for both options.

Included in the kit

72-inch rail with soft-close installed, two door rollers, five wall brackets, two anti-jump rods, two door stops, two floor-guide options, soft-close door brackets and the mounting fasteners shown in the factory parts list.

Review the complete drawing and installation guide for mounting clearances and your door construction before ordering.

Your price

$332.42 per set. Door, decorative door pull and structural mounting board are not included.

Product documents

Factory Warranty (PDF)

Factory specifications (PDF)

Installation instructions (PDF)

Give a pantry, laundry room, closet or study a clean sliding-door entrance with exposed stainless-finish hardware and soft-close movement. This complete hardware set pairs a 72-inch rail with top-mounted rollers for a single wood door.

Fit and specifications

  • Model: BDH-05SS-72-R. One complete hardware set; door is sold separately.

  • 6-foot (72-inch) rail for doors up to 36 inches wide.

  • Stainless-steel finish over steel hardware; soft-close mechanism installed in the rail.

  • Maximum door weight: 175 lb, as specified in the factory installation instructions.

  • Mount the rail to solid wood studs, structural blocking or a properly secured header board. Do not mount the complete rail to drywall alone.

  • Two floor-guide arrangements are included. The internal guide requires a centered groove 1/2 inch wide × 1/2 inch deep in the bottom of the door; see the instructions for both options.

Included in the kit

72-inch rail with soft-close installed, two door rollers, five wall brackets, two anti-jump rods, two door stops, two floor-guide options, soft-close door brackets and the mounting fasteners shown in the factory parts list.

Review the complete drawing and installation guide for mounting clearances and your door construction before ordering.

Your price

$332.42 per set. Door, decorative door pull and structural mounting board are not included.

Product documents

Factory Warranty (PDF)

Factory specifications (PDF)

Installation instructions (PDF)