Slim Shaker ¼-Inch Finish Skin Panels – 42 or 48 × 96 Inches

from $146.92

Cover an exposed cabinet side, island back, or other supported surface with a thin matching finish skin. This flat sheet is intended to be cut and fitted to the project.

Dimensions and details

  • BP4296: 42 inches wide × 96 inches long × ¼ inch thick.

  • Flat finishing skin with no door-style profile.

  • BP4896: 48 inches wide × 96 inches high × ¼ inch thick, offered in Charcoal Black only.

Available finishes

Origami White, Jade Green, Lakeside Blue, Cotton Oak, Charcoal Black, Silver Gray. Choose the finish in the product options. Finish and grain can vary with lighting and the material; compare with your cabinet finish before installation.

Installation planning

Use over suitable backing and allow for cut edges and trim. A ¼-inch skin is not a freestanding structural end panel or a substitute for a ¾-inch finish panel. Measure the finished coverage area before cutting.

Complete your Slim Shaker layout

Coordinate with ¾-inch finish panels, outside-corner trim, scribe molding.

For smaller Cotton Oak finishing pieces, compare the base and wall cabinet skins. For a textured Charcoal Black island or cabinet detail, see the beaded finish panel.

Color & size quick guide: the 42 × 96-inch skin is offered in all six finishes listed above. The 48 × 96-inch skin is offered in Charcoal Black only. Both widths are ¼ inch thick.

Color:
Size:

Cover an exposed cabinet side, island back, or other supported surface with a thin matching finish skin. This flat sheet is intended to be cut and fitted to the project.

Dimensions and details

  • BP4296: 42 inches wide × 96 inches long × ¼ inch thick.

  • Flat finishing skin with no door-style profile.

  • BP4896: 48 inches wide × 96 inches high × ¼ inch thick, offered in Charcoal Black only.

Available finishes

Origami White, Jade Green, Lakeside Blue, Cotton Oak, Charcoal Black, Silver Gray. Choose the finish in the product options. Finish and grain can vary with lighting and the material; compare with your cabinet finish before installation.

Installation planning

Use over suitable backing and allow for cut edges and trim. A ¼-inch skin is not a freestanding structural end panel or a substitute for a ¾-inch finish panel. Measure the finished coverage area before cutting.

Complete your Slim Shaker layout

Coordinate with ¾-inch finish panels, outside-corner trim, scribe molding.

For smaller Cotton Oak finishing pieces, compare the base and wall cabinet skins. For a textured Charcoal Black island or cabinet detail, see the beaded finish panel.

Color & size quick guide: the 42 × 96-inch skin is offered in all six finishes listed above. The 48 × 96-inch skin is offered in Charcoal Black only. Both widths are ¼ inch thick.