Slim Shaker Diagonal Corner Sink Base Cabinet

from $385.04

The Slim Shaker diagonal sink base places the sink at the corner of an L-shaped kitchen. A single door provides access below the sink while the angled front connects the adjoining cabinet runs. This cabinet ships ready to assemble (RTA).

Sizes and configuration

  • NCSB36: 36 inches wide × 34½ inches high × 24 inches deep.
  • NCSB42: 42 inches wide × 34½ inches high × 24 inches deep.
  • One door. Select NCSB36 or NCSB42 to match the planned corner cabinet size.

Cabinet construction

  • ½-inch plywood cabinet box with dovetail construction and a solid hardwood face frame.
  • Full-overlay doors with mortise-and-tenon construction and soft-close, six-way adjustable hinges.
  • Painted doors have HDF stiles, rails, and center panels. Cotton Oak doors have white oak stiles and rails with an HDF center panel faced in white oak veneer.
  • Natural wood veneer interior with a UV-cured finish. Interior wood shade may vary.

Finish and installation planning

Choose from Origami White, Jade Green, Lakeside Blue, Cotton Oak, Charcoal Black, Silver Gray. Cotton Oak has natural grain and stain variation. Its cabinet exterior uses birch veneer; add a matching skin or decorative end panel where you want an exposed cabinet side to match the oak door finish.

Confirm the complete corner layout, sink support, bowl dimensions, plumbing, and adjacent door clearances before ordering. A diagonal sink cabinet's nominal width is not a guaranteed sink opening or a substitute for the corner footprint drawing. Sink, countertop, faucet, and decorative pull are not included.

Complete your Slim Shaker layout

Plan this cabinet with straight-run sink bases, adjoining base cabinets, clearance fillers.

Color:
Size:

The Slim Shaker diagonal sink base places the sink at the corner of an L-shaped kitchen. A single door provides access below the sink while the angled front connects the adjoining cabinet runs. This cabinet ships ready to assemble (RTA).

Sizes and configuration

  • NCSB36: 36 inches wide × 34½ inches high × 24 inches deep.
  • NCSB42: 42 inches wide × 34½ inches high × 24 inches deep.
  • One door. Select NCSB36 or NCSB42 to match the planned corner cabinet size.

Cabinet construction

  • ½-inch plywood cabinet box with dovetail construction and a solid hardwood face frame.
  • Full-overlay doors with mortise-and-tenon construction and soft-close, six-way adjustable hinges.
  • Painted doors have HDF stiles, rails, and center panels. Cotton Oak doors have white oak stiles and rails with an HDF center panel faced in white oak veneer.
  • Natural wood veneer interior with a UV-cured finish. Interior wood shade may vary.

Finish and installation planning

Choose from Origami White, Jade Green, Lakeside Blue, Cotton Oak, Charcoal Black, Silver Gray. Cotton Oak has natural grain and stain variation. Its cabinet exterior uses birch veneer; add a matching skin or decorative end panel where you want an exposed cabinet side to match the oak door finish.

Confirm the complete corner layout, sink support, bowl dimensions, plumbing, and adjacent door clearances before ordering. A diagonal sink cabinet's nominal width is not a guaranteed sink opening or a substitute for the corner footprint drawing. Sink, countertop, faucet, and decorative pull are not included.

Complete your Slim Shaker layout

Plan this cabinet with straight-run sink bases, adjoining base cabinets, clearance fillers.