Slim Shaker Knee Drawer

Add a shallow working drawer beneath a planned desk or vanity worktop with the Slim Shaker knee drawer. Each unit is six inches high and 21 inches deep. This cabinet ships ready to assemble (RTA).

Sizes and configuration

• DD24A: 24 inches wide × 6 inches high × 21 inches deep.
• DD30A: 30 inches wide × 6 inches high × 21 inches deep.
• DD33A: 33 inches wide × 6 inches high × 21 inches deep.
• DD36A: 36 inches wide × 6 inches high × 21 inches deep.
• One soft-closing working drawer. Select the width that fits the planned opening.

Cabinet construction

• ½-inch plywood cabinet box with dovetail construction and a solid hardwood face frame.
• Working drawers use ⅝-inch solid wood dovetail boxes with ½-inch plywood bottoms and full-extension, soft-close undermount glides with six-way adjustment.
• Five-piece drawer fronts match the Slim Shaker door profile.
• Painted drawer-front profiles use HDF. Cotton Oak has white oak framing and an HDF center panel with white oak veneer.
• Natural wood veneer interior with a UV-cured finish. Interior wood shade may vary.

Finish and installation planning

Choose from Origami White, Jade Green, Lakeside Blue, Cotton Oak, Charcoal Black, Silver Gray. Cotton Oak has natural grain and stain variation. Its cabinet exterior uses birch veneer; add a matching skin or decorative end panel where you want an exposed cabinet side to match the oak door finish.

Allow adequate seated knee clearance after accounting for the drawer height and worktop thickness. Provide appropriate support as part of the surrounding cabinetry design. Worktop, supporting cabinets, decorative pull, and organizers are not included.

Complete your Slim Shaker layout

Plan this cabinet with desk-height file drawer bases, vanity drawer banks, matching fillers.