Plan a double-sink bathroom layout with the Slim Shaker vanity that places three working drawers between two sink compartments. Choose the 57- or 60-inch cabinet width. This cabinet ships ready to assemble (RTA).
Sizes and configuration
- VA57D: 57 inches wide × 34½ inches high × 21 inches deep.
- VA60D: 60 inches wide × 34½ inches high × 21 inches deep.
- Four doors, three central drawers in a nominal 12-inch drawer bank, and two false drawer fronts.
Cabinet construction
- ½-inch plywood cabinet box with dovetail construction and a solid hardwood face frame.
- Full-overlay doors with mortise-and-tenon construction and soft-close, six-way adjustable hinges.
- Painted doors have HDF stiles, rails, and center panels. Cotton Oak doors have white oak stiles and rails with an HDF center panel faced in white oak veneer.
- Working drawers use ⅝-inch solid wood dovetail boxes with ½-inch plywood bottoms and full-extension, soft-close undermount glides with six-way adjustment.
- Five-piece drawer fronts match the Slim Shaker door profile.
- Natural wood veneer interior with a UV-cured finish. Interior wood shade may vary.
Finish and installation planning
Choose from Origami White, Jade Green, Lakeside Blue, Cotton Oak, Charcoal Black, Silver Gray. Cotton Oak has natural grain and stain variation. Its cabinet exterior uses birch veneer; add a matching skin or decorative end panel where you want an exposed cabinet side to match the oak door finish.
Match the sink, countertop, drain, and supply lines to this exact cabinet configuration. Drawer placement can affect plumbing clearance even when two cabinets have the same overall width. The listed dimensions exclude the countertop. Sink, countertop, faucet, and decorative pulls are not included.
Complete your Slim Shaker layout
Plan this cabinet with vanity sink bases, matching vanity drawer banks, matching fillers, decorative end panels.
Plan a double-sink bathroom layout with the Slim Shaker vanity that places three working drawers between two sink compartments. Choose the 57- or 60-inch cabinet width. This cabinet ships ready to assemble (RTA).
Sizes and configuration
- VA57D: 57 inches wide × 34½ inches high × 21 inches deep.
- VA60D: 60 inches wide × 34½ inches high × 21 inches deep.
- Four doors, three central drawers in a nominal 12-inch drawer bank, and two false drawer fronts.
Cabinet construction
- ½-inch plywood cabinet box with dovetail construction and a solid hardwood face frame.
- Full-overlay doors with mortise-and-tenon construction and soft-close, six-way adjustable hinges.
- Painted doors have HDF stiles, rails, and center panels. Cotton Oak doors have white oak stiles and rails with an HDF center panel faced in white oak veneer.
- Working drawers use ⅝-inch solid wood dovetail boxes with ½-inch plywood bottoms and full-extension, soft-close undermount glides with six-way adjustment.
- Five-piece drawer fronts match the Slim Shaker door profile.
- Natural wood veneer interior with a UV-cured finish. Interior wood shade may vary.
Finish and installation planning
Choose from Origami White, Jade Green, Lakeside Blue, Cotton Oak, Charcoal Black, Silver Gray. Cotton Oak has natural grain and stain variation. Its cabinet exterior uses birch veneer; add a matching skin or decorative end panel where you want an exposed cabinet side to match the oak door finish.
Match the sink, countertop, drain, and supply lines to this exact cabinet configuration. Drawer placement can affect plumbing clearance even when two cabinets have the same overall width. The listed dimensions exclude the countertop. Sink, countertop, faucet, and decorative pulls are not included.
Complete your Slim Shaker layout
Plan this cabinet with vanity sink bases, matching vanity drawer banks, matching fillers, decorative end panels.
