Build a coordinated upper-cabinet run with this 12-inch-tall Slim Shaker wall cabinet. Its 12-inch depth and two-door front provide enclosed kitchen storage with a narrow-frame profile. This cabinet ships ready to assemble (RTA).
W2412: 24 inches wide × 12 inches high × 12 inches deep. 2 doors.
W2712: 27 inches wide × 12 inches high × 12 inches deep. 2 doors.
W3012: 30 inches wide × 12 inches high × 12 inches deep. 2 doors.
W3312: 33 inches wide × 12 inches high × 12 inches deep. 2 doors.
W3612: 36 inches wide × 12 inches high × 12 inches deep. 2 doors.
Select the complete model shown for the required width, height, and depth. Decorative pulls are not included.
½-inch plywood cabinet box with dovetail construction and a solid hardwood face frame.
Slim Shaker doors with consistent 0.60-inch-wide rails and stiles. Full-overlay doors with mortise-and-tenon construction and soft-close, six-way adjustable hinges.
Painted doors have HDF stiles, rails, and center panels. Cotton Oak doors have white oak stiles and rails with an HDF center panel faced in white oak veneer.
Natural wood veneer interior with a UV-cured finish. Interior wood shade may vary.
Choose from Origami White, Jade Green, Cotton Oak, Charcoal Black, Silver Gray. Cotton Oak has natural grain and stain variation. Its cabinet exterior uses birch veneer; add a matching skin or decorative end panel where you want an exposed cabinet side to match the oak door finish.
Plan the mounting height, door clearance, ceiling clearance, and neighboring appliances before ordering. Secure wall cabinets to suitable structural support using the appropriate installation method. Check appliance clearances separately when a cabinet is installed above or beside an appliance.
Plan this cabinet with matching fillers, decorative wall end panels, matching base cabinets.
Build a coordinated upper-cabinet run with this 12-inch-tall Slim Shaker wall cabinet. Its 12-inch depth and two-door front provide enclosed kitchen storage with a narrow-frame profile. This cabinet ships ready to assemble (RTA).
W2412: 24 inches wide × 12 inches high × 12 inches deep. 2 doors.
W2712: 27 inches wide × 12 inches high × 12 inches deep. 2 doors.
W3012: 30 inches wide × 12 inches high × 12 inches deep. 2 doors.
W3312: 33 inches wide × 12 inches high × 12 inches deep. 2 doors.
W3612: 36 inches wide × 12 inches high × 12 inches deep. 2 doors.
Select the complete model shown for the required width, height, and depth. Decorative pulls are not included.
½-inch plywood cabinet box with dovetail construction and a solid hardwood face frame.
Slim Shaker doors with consistent 0.60-inch-wide rails and stiles. Full-overlay doors with mortise-and-tenon construction and soft-close, six-way adjustable hinges.
Painted doors have HDF stiles, rails, and center panels. Cotton Oak doors have white oak stiles and rails with an HDF center panel faced in white oak veneer.
Natural wood veneer interior with a UV-cured finish. Interior wood shade may vary.
Choose from Origami White, Jade Green, Cotton Oak, Charcoal Black, Silver Gray. Cotton Oak has natural grain and stain variation. Its cabinet exterior uses birch veneer; add a matching skin or decorative end panel where you want an exposed cabinet side to match the oak door finish.
Plan the mounting height, door clearance, ceiling clearance, and neighboring appliances before ordering. Secure wall cabinets to suitable structural support using the appropriate installation method. Check appliance clearances separately when a cabinet is installed above or beside an appliance.
Plan this cabinet with matching fillers, decorative wall end panels, matching base cabinets.
