Slim Shaker Angled Wall End Cabinet

Create an angled transition at the end of an upper-cabinet run with this Slim Shaker wall end cabinet. The two-door configuration comes in three heights with shelf quantities matched to the selected height. This cabinet ships ready to assemble (RTA).

Sizes and configuration

• WEA1230: 12 inches wide × 30 inches high × 12 inches deep. 2 doors. 2 shelves.
• WEA1236: 12 inches wide × 36 inches high × 12 inches deep. 2 doors. 2 shelves.
• WEA1242: 12 inches wide × 42 inches high × 12 inches deep. 2 doors. 3 shelves.
• Select the complete model shown for the required width, height, and depth. Decorative pulls are not included.

Cabinet construction

• ½-inch plywood cabinet box with dovetail construction and a solid hardwood face frame.
• Full-overlay doors with mortise-and-tenon construction and soft-close, six-way adjustable hinges.
• Painted doors have HDF stiles, rails, and center panels. Cotton Oak doors have white oak stiles and rails with an HDF center panel faced in white oak veneer.
• Natural wood veneer interior with a UV-cured finish. Interior wood shade may vary.

Finish and installation planning

Choose from Origami White, Jade Green, Cotton Oak, Charcoal Black, Silver Gray. Cotton Oak has natural grain and stain variation. Its cabinet exterior uses birch veneer; add a matching skin or decorative end panel where you want an exposed cabinet side to match the oak door finish.

Check the angled footprint and both door clearances against the wall and adjacent cabinetry. This WEA configuration differs from the one-door WEC end-corner cabinet. Secure to suitable structural support. Decorative pulls are not included.

Complete your Slim Shaker layout

Plan this cabinet with one-door wall end-corner cabinets, matching fillers, decorative wall end panels, matching base cabinets.