Combine upper storage with an open appliance area in this 30-inch-wide, 25-inch-deep microwave wall cabinet. The doors fit within a solid-wood face frame for the flush Inset appearance. This cabinet ships ready to assemble (RTA).
Sizes and configuration
WM303025: 30 inches wide × 30 inches high × 25 inches deep.
WM303625: 30 inches wide × 36 inches high × 25 inches deep.
WM304225: 30 inches wide × 42 inches high × 25 inches deep.
Two solid recessed-panel inset doors above an open lower compartment. The opening is 27 inches wide × 16½ inches high. Overall heights are 30, 36 or 42 inches; this cabinet has no drawer or toe kick.
Construction and hardware
⅝-inch plywood cabinet box with dovetail construction and a solid-wood face frame.
Soft-close door hardware.
Solid recessed-panel doors sit within the surrounding face frame with narrow reveal gaps.
Concealed closed-compartment interiors have a natural wood finish. Exposed interior surfaces of the open appliance bay match the selected exterior finish.
Choose your finish
Choose Hazelnut Oak, Origami White or Truffle Brown. Hazelnut Oak uses white oak door framing with a veneered plywood recessed center panel. Truffle Brown uses birch. Origami White has a painted finish. Natural grain and stain variation are part of the wood finishes.
The cabinet exterior matches the selected door finish. Stained cabinet exteriors use birch veneer, and concealed closed-compartment interiors have a natural wood finish. Exposed interior surfaces of the open appliance bay match the selected exterior finish. Small natural-wood edges may be visible at the top and bottom. Optional decorative end panels, skins, and fillers are sold separately.
Assembly and installation planning
The RTA package provides the cabinet components, door assembly, specified shelves and door hardware. Assembly and installation are required. Decorative knobs and pulls, fillers, trim, end panels, lighting and wall installation fasteners are not included.
The 27-inch-wide × 16½-inch-high opening does not establish appliance compatibility. Confirm the appliance manufacturer’s ventilation, trim-kit, electrical, service and installation requirements, including required depth and clearances. Have the installer verify support and anchoring for both the cabinet and the selected appliance. The appliance and any trim kit are sold separately.
Install level, square and securely anchored to suitable wall framing. Use fasteners appropriate for the wall construction. Check ceiling, countertop and adjacent appliance clearances before finalizing the layout.
Plan your MDI Inset kitchen
Explore the MDI Inset Collection and coordinating double-door and single-drawer base cabinets. For layout or size help, use the floating Connect with us widget. It is the fastest way to reach us and notifies the owner directly.
The Truffle Brown cabinet image shows a 30-inch-wide, 36-inch-high cabinet with 25-inch depth as a representative configuration. The complete framed finish samples show the Inset frame, drawer and solid recessed-panel door as finish references; this wall cabinet has no drawer. See the selected model and dimension drawing for actual size, door arrangement and installation planning. Wood grain, lighting and screen settings affect finish appearance.
Combine upper storage with an open appliance area in this 30-inch-wide, 25-inch-deep microwave wall cabinet. The doors fit within a solid-wood face frame for the flush Inset appearance. This cabinet ships ready to assemble (RTA).
Sizes and configuration
WM303025: 30 inches wide × 30 inches high × 25 inches deep.
WM303625: 30 inches wide × 36 inches high × 25 inches deep.
WM304225: 30 inches wide × 42 inches high × 25 inches deep.
Two solid recessed-panel inset doors above an open lower compartment. The opening is 27 inches wide × 16½ inches high. Overall heights are 30, 36 or 42 inches; this cabinet has no drawer or toe kick.
Construction and hardware
⅝-inch plywood cabinet box with dovetail construction and a solid-wood face frame.
Soft-close door hardware.
Solid recessed-panel doors sit within the surrounding face frame with narrow reveal gaps.
Concealed closed-compartment interiors have a natural wood finish. Exposed interior surfaces of the open appliance bay match the selected exterior finish.
Choose your finish
Choose Hazelnut Oak, Origami White or Truffle Brown. Hazelnut Oak uses white oak door framing with a veneered plywood recessed center panel. Truffle Brown uses birch. Origami White has a painted finish. Natural grain and stain variation are part of the wood finishes.
The cabinet exterior matches the selected door finish. Stained cabinet exteriors use birch veneer, and concealed closed-compartment interiors have a natural wood finish. Exposed interior surfaces of the open appliance bay match the selected exterior finish. Small natural-wood edges may be visible at the top and bottom. Optional decorative end panels, skins, and fillers are sold separately.
Assembly and installation planning
The RTA package provides the cabinet components, door assembly, specified shelves and door hardware. Assembly and installation are required. Decorative knobs and pulls, fillers, trim, end panels, lighting and wall installation fasteners are not included.
The 27-inch-wide × 16½-inch-high opening does not establish appliance compatibility. Confirm the appliance manufacturer’s ventilation, trim-kit, electrical, service and installation requirements, including required depth and clearances. Have the installer verify support and anchoring for both the cabinet and the selected appliance. The appliance and any trim kit are sold separately.
Install level, square and securely anchored to suitable wall framing. Use fasteners appropriate for the wall construction. Check ceiling, countertop and adjacent appliance clearances before finalizing the layout.
Plan your MDI Inset kitchen
Explore the MDI Inset Collection and coordinating double-door and single-drawer base cabinets. For layout or size help, use the floating Connect with us widget. It is the fastest way to reach us and notifies the owner directly.
The Truffle Brown cabinet image shows a 30-inch-wide, 36-inch-high cabinet with 25-inch depth as a representative configuration. The complete framed finish samples show the Inset frame, drawer and solid recessed-panel door as finish references; this wall cabinet has no drawer. See the selected model and dimension drawing for actual size, door arrangement and installation planning. Wood grain, lighting and screen settings affect finish appearance.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5